| Test Points |
128 points (two 64 pin .1" dual-row headers) |
| Test Voltage |
9 volts current limited to 1.8mA |
| Sensitivity |
All interconnections detected at 4k ohms ±20% |
| Max Capacitance |
.1µFd (effective testing for unshielded cables under 5000 feet; some heavily shielded cables may be limited to shorter lengths) |
| Test Rate |
.5 second per test for typical cables (<10 feet) |
| Signature |
Six-digit hexadecimal, compatible with other Cirris analyzers |
| Probe |
For test-point identification with probe; may be used with wrist strap to identify wires by hand. Input mates to .175" banana jack. |
| Memory |
Internal memory backup of last cable list in use, external memory on Memory Tokens, one list per token. |
| Display |
2 line x 16 character LCD |
| Printer Output |
RS-232 serial port using DB9 female connector; 300, 1200, 9600 baud |
| Temperature |
Operates from 40 to 110°F; 5 to 45°C |
| Line Power |
100-135/220-240 VAC, 50-60 Hz .2 watts 9 volts |
| Battery Power |
Alternative power from standard 9 volt battery (NEDA 1604) 20mA drain for 25 hours on 500mA
hours Alkaline battery or 5 hours on a 7.2 volt 100mA hour NiCad battery. The tester left
idle will power down after five minutes. |
| Size |
8.5" x 5.5" x 2.2" (21.6 cm x 14 cm x 5.6 cm) |
| Weight |
1.2 lbs. (0.5 kg) |
| Warranty |
One year parts and labor. |
Copyright © Cirris Systems Corp.
